CT6000 CONVERGENT PHOTONICS laser is an innovative concept laser based on patented technology. It is equipped with two different process fibers, one with high power low brightness for welding/brazing (BPP = 66 mm*mrad ), one at lower power higher brightness (BPP = 4 mm*mrad) for cutting/remote welding .
At the push of a button the laser can switch between one fiber and the other, allowing:
- Maximum flexibility, as the same laser suits all possible applications
- Wider application spectrum (cutting, laser welding, brazing, cladding)
- Lower ownership cost
- Optimal for low to medium production capacity, switching over different jobs
Switching from a configuration to the other does not require recalibration or adjustment, and require just a few seconds. The laser will supervise the fiber safety of both cables independently, and allows to use one process fiber while the other is disconnect or its working cell is accessed to change part.
CONVERGENT PHOTONICS laser CT6000 is equipped with n. 2 exit fibers a 100 µm core feeding fiber on the fiber side, a 600 µm core feeding fiber on diode side: